Magna / Verada owners from TE (KE) 1996 - TW (KW) 2005 Discussion here.
heya guys, planning some mods to the beast and next in line is to add driving lights, now i know next to bugger all about em so would appreciate any suggestions, tips and/or advice etc., the stock parabolics are pretty crappy on low beam, though the high beam is acceptable, so i would have...
Looking at TEMAGNA and other people who have done this so... Right i know that you simply put on some hinges on the end of the stock boot lid arm but my question is this, how do you stop the boot from being openable once you have done this, a friend suggested using a scissor hinge design ( will...
Howdy yawl, Does anyone know if there is a supplier in Adelaide? or if not, anywhere else in Oz. Thanks in advance
Has anybody looked at doing this to their car yet? I think the lambo style doors would look crazy on a third gen magna https://www.autoloc.com/products/lambo.lasso https://www.lsd-solutions.de/index_e.php
Looking for mag wheels for a while now and have come across some nice specials. Unfortunately I know next to nothing about what will fit to my magna. 1997 TF Sedan, lowered. I know its a 4x114.3 stud pattern. But unsure what will fit (legally) in terms of rim width, tyre profile etc. ...
Searched and couldn't find the info I was after. I'll be getting 17x8 or 18x8 rims at some point. What offset do 3rd gens run? I'd like them to sit out a little further than the stock 16x7s. Cheers!
Hey, Just wondering if anyone knows what turbos other than GT25/28's can be fitted to magna's. :think: :think: :think: Engine: 3.5L V6 Model: TH Thanks.
Hey guys its time for me to get a kit for the rear of my TE. Now i have a crack in the rear bar and i could probably get away without fixing it, if it was to stick GE rear pods on. (rest of my kit is GE) But i was thinking of maybe fitting a ralliart rear bar on there instead because my current...
Has anyone rubbed the bottom of their sump off before? I have a heap of little holes in the bottom sump forming. Anyone had to replace a sump before? What kind of price would i have to pay for a new sump?
Hey guys, I was just thinking if anyone has bothered trying a sump plug drain valve. I know with me that it would be handy since I only have a hand jack and its a pain in the butt come service time to drain the oil and since the front's on superlows it takes EXTRA time to jack the damn thing up.. ...
The genius previous owner of my car didn't use a washer on the sump plug. The bolt is now seized onto the sump. I have tried wd-40 etc but nothing seems to shift it. I have put a massive amount of torque onto it but it just won't move. How do I get this off without drilling, rattling it off, or...
Hey guys. What is the size for the sump plug on a TE V6? I just read here now that the socket size is 24mm but what about the rest of it? I went to two different places earlier today and neither of them could tell me what size it is :roll: One just said.. "Mate.. unless it's a Toyota I just...
Hey all, Went to do an oil change the other day and got a nasty surprise. Under teh terms and conditions of my 3-year/100 000km used car warrenty I have to get Mitsubishi to service my car every 10 000km. I like to do an intermediate oil and filter change. I went to do my change on thursday...
Hey guys, Here's the deal... i've gotta change oil on my mates TS 4 cylinder... so i got under the car to check size of the sump plug (i assume the same as my gen1 astron - 24mm) The socket and/or ring spanner fits on but slips off easy cos whoever serviced this in the past...
Today I just thought before changing the oil, I wonder what everybody uses, the fibre washer or an O ring. Personally I use both so A) the sump plug isn't tight as a cats behind and B) the o ring gives it a good seal. Hasn't leaked in a year so i'm confident in my choice. What about the rest of...
does anyone know the size of the sump plug on a 98 TF?? i wanna get a socket that size cause all i got is an adjustable spanner and dont want to round off the head on the bolt. Also should i change the sump plug gasket when changing the oil? Cheers
What size spanner/socket do i need to get the sump plug out of my 2.6 litre 1993 magna wagon?
To save me some trouble.. does anyone know the socket size il need to undo the sump plug on a TH magna? Thanks
Hi, was gonna change the oil and filter the other day, in a 98 magna, now im guessing the sump plug blot is 23mm, now we have 18, 19, 20, 21, 22, 24 lol.. no 23mm, was gonna have a go at undoing it with the shifter, but thought i would ask wats the best way to try get it undone with out stuffing...
Has anyone redone their own sun visors? If yes, how?? I've tried different ways without much success at looking decent and upholsterers in this town don't like touching them.
There are currently 60 users browsing this forum. (1 members & 59 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
